SPARK ident error -uninitiate!

[eeng]

Originally Posted by al5911

Emmm, I'll flash my uboot when I get my null cable modem.... and when I'm confident enough to flash it. I don't want to kill my receiver.... .
This is my first stb

did your problems solved?

[fajri]

Originally Posted by eeng

did your problems solved?

the same as, my amiko problem too

[jibam]

is this can cure the problem "sw is illegal, please contact with your dealer!!" ???
need help..

[ALLIEN]

With Putty and rs232 cable nulmodem

When you see the 'PK7105' prompt, copy the following command without the quotes ("") and press ENTER:
"set bootargs console=ttyAS0,115200 rw ramdisk_size=6144 init=/linuxrc root=/dev/ram0 nwhwconf=device:eth0,hwaddr:00:06:37:04:15:00
ip=192.168.40.83:192.168.40.19:192.168.40.1:255.255.0.0:lh:eth0:off
stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 bigphysarea=6000"

When you see the 'PK7105' prompt again, copy the following command without the quotes ("") and press ENTER:
"nboot.i 0x80000000 0 0x00100000 ;bootm 0x80000000"

The receiver should boot to SPARK

[hakieuanh]

It does not work when connected to rs232

[felitz]

I have the same problem, when I connect with RS232 cable, wrote the only type tuner and in-boot version! Can not type in anything in TELENET! Please help

[felitz]

please help me how to fix my receiver...

[khaledrwan22]

Originally Posted by comag

Amiko Alien SHD8900


spark_rescue_image_Amiko_SHD-8900_Alien_1.2.52

i hope we get solution