SPARK ident error -uninitiate! - «•»World-Satellite Forum«•»

al5911 · 14-01-2013, 06:30

Hi all. I have this very annoying problem when I try to boot into spark on my Amiko Alien SHD 8900. The last time before this thing happen to me was that I updated spark from 1.2.60 to the latest 1.2.61 thru spark online. I tried with NewSpark_Rescue_v1.2.31 and spark_rescue_image_Amiko_SHD-8900_Alien_1.2.52 but the problem won't go away! Here is the photos ...

comag · 14-01-2013, 09:30

Amiko Alien SHD8900

spark_rescue_image_Amiko_SHD-8900_Alien_1.2.52

al5911 · 14-01-2013, 10:24

Yeah, I had tried that too. I flashed both rescue image one after the other for almost 10x now but none worked. The error still shows! Is it something to do with the uboot? But I can boot into E2 (I use PKT nebula mod) just fine.

comag · 14-01-2013, 10:53

upload what I have given and not thinking up have downloaded the firmware from another tuner

al5911 · 14-01-2013, 13:10

Quote:

Originally Posted by comag

upload what I have given and not thinking up have downloaded the firmware from another tuner

Downloaded your file, flashed it and still the same error...

Any other suggestion?

ALLIEN · 14-01-2013, 13:18

Try this:

Code:

http://www.world-satellite.net/141070-post1.html

al5911 · 14-01-2013, 13:37

Where I can get the uboot file sir? As what I had read on other forum, if uboot corrupted I shoudn't even can boot into E2 also. I can boot just fine into E2.

ALLIEN · 14-01-2013, 14:03

Code:

http://www.world-satellite.net/amiko...-2-17-sh4.html

Code:

http://www.world-satellite.net/172344-post1.html

Code:

HyperTerminal is included in Windows XP: Start / All Programs / Accessories / Communications 
...... give click on ---
 hiperterminal - we will open two panels, the middle panel give it a name at random .. click on ok / ...ne Alec ....
 com port usually 1.
../ok/la port setings-filled top to bottom panel / 115200/8 / none / one / none / apply / followed by clik - ok 
--- / / transfer / Send File / browse / -
-- select desired package / didijos 1KXmodem
 ---- select --- followed by --- send

al5911 · 14-01-2013, 14:25

Sorry but how to use the Hypercam emu? Didn't I just need uBoot.bin file that I have to upload to the box with hyperterminal using RS232 null cable modem?
Emmm...I got confuse now...

ALLIEN · 14-01-2013, 20:37

I put here also file u-boot my friend:
Try :

1. Open [HyperTerminal] and set default parameters
Symbol rate: [1152000]
Data bits: [8]
Parity: [None]
Stop Bits: [1]
Data Flow Control: [None]
2. Select [Transfer / File Transfer] Option
3. Select [u-boot.bin] and use [Ymodem] Option, send file
Upgrade Step:
1. Keep Pressing [OK] Button in Front Panel, THEN power on STB.
2. After 5 seconds you Will see [Force] in LED, release [OK] button and press [Left]
Button.
3. If everything is ok, the STB Will you see [LOAD] shinning in LED.

al5911 · 15-01-2013, 01:38

Thank you sir... that's what I need

. I'll try it when I receive my null cable modem that I ordered from aliexpress four days ago... I don't know how to make one

.

Sorry to ask but which uboot version is this? My receiver is on uboot version 1.3.1-021. And I had found one on ******** labelled as version 131-11. Honestly I'm not sure if this is for amiko 8900.
The file size is 512kb extracted. And the one you had given to me is 384kb extracted.

ALLIEN · 16-01-2013, 20:10

Try my file mate

not use from other part.

al5911 · 18-01-2013, 02:03

Emmm, I'll flash my uboot when I get my null cable modem.... and when I'm confident enough to flash it. I don't want to kill my receiver....

.
This is my first stb

eeng · 22-01-2013, 19:14

Quote:

Originally Posted by ALLIEN

I put here also file u-boot my friend:
Try :

1. Open [HyperTerminal] and set default parameters
Symbol rate: [1152000]
Data bits: [8]
Parity: [None]
Stop Bits: [1]
Data Flow Control: [None]
2. Select [Transfer / File Transfer] Option
3. Select [u-boot.bin] and use [Ymodem] Option, send file
Upgrade Step:
1. Keep Pressing [OK] Button in Front Panel, THEN power on STB.
2. After 5 seconds you Will see [Force] in LED, release [OK] button and press [Left]
Button.
3. If everything is ok, the STB Will you see [LOAD] shinning in LED.

thanks in advance, can you explain more detail to send this file,what connection it need?

eeng · 22-01-2013, 19:28

Quote:

Originally Posted by ALLIEN

Code:

http://www.world-satellite.net/amiko...-2-17-sh4.html

Code:

http://www.world-satellite.net/172344-post1.html

Code:

HyperTerminal is included in Windows XP: Start / All Programs / Accessories / Communications 
...... give click on ---
 hiperterminal - we will open two panels, the middle panel give it a name at random .. click on ok / ...ne Alec ....
 com port usually 1.
../ok/la port setings-filled top to bottom panel / 115200/8 / none / one / none / apply / followed by clik - ok 
--- / / transfer / Send File / browse / -
-- select desired package / didijos 1KXmodem
 ---- select --- followed by --- send

where can we found hyperterminal in win7? thanks