amiko micro hd se

[konstantine]

Try to change compatibility mode of the loader or try to another computer with windows xp.On windows xp 100% works.

[Ari_Mc]

Try to change compatibility mode of the loader or try to another computer with windows xp.On windows xp 100% works.

i will try bout i think i find it out why want upgrade by usb bicose of a date of SW in reviver
http://www.world-satellite.net/attachment.php?attachmentid=145889&stc=1&d=1428084971 this is the date of SW i have it on my receiver
http://www.world-satellite.net/attachment.php?attachmentid=145889&stc=1&d=1428084971 this is the date of the SW latest one on usb
http://www.world-satellite.net/attachment.php?attachmentid=145891&stc=1&d=1428084971 this is the date of the SW every time i want to upgrade not only this SW bout any SW i try to upgrade it give me this date bout on usb is different modified date

[konstantine]

Use for recovery official sw from amiko homepage.Date of last edit is inserted in maincode(AV) and is different than displayed date in windows.

[Ari_Mc]

Use for recovery official sw from amiko homepage.Date of last edit is inserted in maincode(AV) and is different than displayed date in windows.

i did try in xp to bout wont work http://www.world-satellite.net/attachment.php?attachmentid=145929&stc=1&d=1428141556 there is nothing wrong with Sw and the Software or windows there is problem with my receiver

[odiu]

Same problem to me. Aceeasi problema e si la mine.

[konstantine]

The preparation of receiver:
1st step unplug power cord
2nd step load firmware in upgrage tool(make alive my stb chip 3511)
3rd step select allsw+bootloader,tick upgrade not dump,click next and fast plug back power cord of your receiver.Good luck !

[Ari_Mc]

Same problem to me. Aceeasi problema e si la mine.

sorry my friend you and me we are trap we have flash with this AMIKO_MicroHD_SE_Starlight_2.0.78_by Dekolte.rar posted by edoroki
today i change my receiver because this SW is not good and i you flash this once you want be able to change it again to another SW it will be stuck on this SW

[Ari_Mc]

http://www.world-satellite.net/attachment.php?attachmentid=145979&stc=1&d=1428253519 is there a plugin for amiko micro hd se to add this option to my receiver

[UGli]

The last comment was some time ago. But I faced the same problem now (STB freezed) and found the solution how to burn original firmware to Amiko micro HD SE via RS232. May be it will be of help to others.
I used the analog Video-Cable supplied with the Box (lengths of different 4-ring 3,5mm jack may not suit, as the 4th ring here is longer than others) and connected it via wires to the RS232 (see picture):

RS232: VideoCable RCA-Plug: VideoCableJack:
Pin 5 = GND any outer ring 4th ring
Pin 2 = R (eceive) yellow tip 3rd ring
Pin 5 = GND red tip 2nd ring
Pin 3 = T (ransmit) white tip 1st ring (tip

Software: (better use Windows XP):
1.) connect rs232 with Amiko micro HD SE physically (by cable) and plug power cable to receiver
2.) connect rs232 with Amiko micro HD SE by Software “Universal Upgrade SD-HD by Dekolte”
3.) download/ burn firmware from PC to Receiver with “Universal Loader SD-HD by Dekolte”
(have time! it downloads 2 times 0-100%, then it burnes)
Remarks: - if Step 2 or 3 doesn't work: unplug power cable and
fast plug it after clicking “next” at step 3.)
- select “all sw+bootloader” / tick “upgrade” not “dump”