SPARK ident error -uninitiate!

[al5911]

Thank you sir... that's what I need okey.gif. I'll try it when I receive my null cable modem that I ordered from aliexpress four days ago... I don't know how to make one hihih.gif.

Sorry to ask but which uboot version is this? My receiver is on uboot version 1.3.1-021. And I had found one on ******** labelled as version 131-11. Honestly I'm not sure if this is for amiko 8900.
The file size is 512kb extracted. And the one you had given to me is 384kb extracted.

[ALLIEN]

Try my file mateokey.gif not use from other part.

[al5911]

Emmm, I'll flash my uboot when I get my null cable modem.... and when I'm confident enough to flash it. I don't want to kill my receiver.... hihih.gif.
This is my first stb conie.gif

[eeng]

I put here also file u-boot my friend:
Try :

1. Open [HyperTerminal] and set default parameters
Symbol rate: [1152000]
Data bits: [8]
Parity: [None]
Stop Bits: [1]
Data Flow Control: [None]
2. Select [Transfer / File Transfer] Option
3. Select [u-boot.bin] and use [Ymodem] Option, send file
Upgrade Step:
1. Keep Pressing [OK] Button in Front Panel, THEN power on STB.
2. After 5 seconds you Will see [Force] in LED, release [OK] button and press [Left]
Button.
3. If everything is ok, the STB Will you see [LOAD] shinning in LED.



thanks in advance, can you explain more detail to send this file,what connection it need?

[eeng]

http://www.world-satellite.net/amiko-plugins/74235-emu_hypercam-2-17-sh4.htmlhttp://www.world-satellite.net/172344-post1.htmlHyperTerminal is included in Windows XP: Start / All Programs / Accessories / Communications
...... give click on ---
hiperterminal - we will open two panels, the middle panel give it a name at random .. click on ok / ...ne Alec ....
com port usually 1.
../ok/la port setings-filled top to bottom panel / 115200/8 / none / one / none / apply / followed by clik - ok
--- / / transfer / Send File / browse / -
-- select desired package / didijos 1KXmodem
---- select --- followed by --- send


where can we found hyperterminal in win7? thanks

[eeng]

Emmm, I'll flash my uboot when I get my null cable modem.... and when I'm confident enough to flash it. I don't want to kill my receiver.... hihih.gif.
This is my first stb conie.gif

did your problems solved?

[fajri]

did your problems solved?

the same as, my amiko problem too

[jibam]

is this can cure the problem "sw is illegal, please contact with your dealer!!" ???
need help..

[ALLIEN]

With Putty and rs232 cable nulmodem

When you see the 'PK7105' prompt, copy the following command without the quotes ("") and press ENTER:
"set bootargs console=ttyAS0,115200 rw ramdisk_size=6144 init=/linuxrc root=/dev/ram0 nwhwconf=device:eth0,hwaddr:00:06:37:04:15:00
ip=192.168.40.83:192.168.40.19:192.168.40.1:255.255.0.0:lh:eth0:off
stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 bigphysarea=6000"

When you see the 'PK7105' prompt again, copy the following command without the quotes ("") and press ENTER:
"nboot.i 0x80000000 0 0x00100000 ;bootm 0x80000000"

The receiver should boot to SPARK

[hakieuanh]

It does not work when connected to rs232