SPARK ident error -uninitiate!

[al5911]

Hi all. I have this very annoying problem when I try to boot into spark on my Amiko Alien SHD 8900. The last time before this thing happen to me was that I updated spark from 1.2.60 to the latest 1.2.61 thru spark online. I tried with NewSpark_Rescue_v1.2.31 and spark_rescue_image_Amiko_SHD-8900_Alien_1.2.52 but the problem won't go away! Here is the photos ...

[comag]

Amiko Alien SHD8900


spark_rescue_image_Amiko_SHD-8900_Alien_1.2.52

[al5911]

Yeah, I had tried that too. I flashed both rescue image one after the other for almost 10x now but none worked. The error still shows! Is it something to do with the uboot? But I can boot into E2 (I use PKT nebula mod) just fine.

[comag]

upload what I have given and not thinking up have downloaded the firmware from another tuner

[al5911]

upload what I have given and not thinking up have downloaded the firmware from another tuner

Downloaded your file, flashed it and still the same error...

Any other suggestion?

[ALLIEN]

Try this:
http://www.world-satellite.net/141070-post1.html

[al5911]

Where I can get the uboot file sir? As what I had read on other forum, if uboot corrupted I shoudn't even can boot into E2 also. I can boot just fine into E2.

[ALLIEN]

http://www.world-satellite.net/amiko-plugins/74235-emu_hypercam-2-17-sh4.htmlhttp://www.world-satellite.net/172344-post1.htmlHyperTerminal is included in Windows XP: Start / All Programs / Accessories / Communications
...... give click on ---
hiperterminal - we will open two panels, the middle panel give it a name at random .. click on ok / ...ne Alec ....
com port usually 1.
../ok/la port setings-filled top to bottom panel / 115200/8 / none / one / none / apply / followed by clik - ok
--- / / transfer / Send File / browse / -
-- select desired package / didijos 1KXmodem
---- select --- followed by --- send

[al5911]

Sorry but how to use the Hypercam emu? Didn't I just need uBoot.bin file that I have to upload to the box with hyperterminal using RS232 null cable modem?
Emmm...I got confuse now... umise.gif

[ALLIEN]

I put here also file u-boot my friend:
Try :

1. Open [HyperTerminal] and set default parameters
Symbol rate: [1152000]
Data bits: [8]
Parity: [None]
Stop Bits: [1]
Data Flow Control: [None]
2. Select [Transfer / File Transfer] Option
3. Select [u-boot.bin] and use [Ymodem] Option, send file
Upgrade Step:
1. Keep Pressing [OK] Button in Front Panel, THEN power on STB.
2. After 5 seconds you Will see [Force] in LED, release [OK] button and press [Left]
Button.
3. If everything is ok, the STB Will you see [LOAD] shinning in LED.