amiko micro hd se
 

Salut. Am acest receptor si sw 2.0.78 .Problema este ca nu pot sa mai pun alt soft,imi da eroare la citirea sw.Stiti cum as putea sa rezolv asta?Va multumesc.

Re: amiko micro hd se
 

Only solution :rs232 cable.
Singura solutie:cablu rs232

Re: amiko micro hd se
 

i have the same problem as you i did install this SW AMIKO_MicroHD_SE_Starlight_2.0.78_by Dekolte.rar
and now is stuck there i did try every thing all SW that are able for this receiver and i did try the rs232 cable to bot it's same as usual
We are stack my friend bout the time will fix it

Re: amiko micro hd se
 

Use a loader designed for your type of receiver,stock firmware and load "allcode+bootloader"
Here u can find loader :

Re: amiko micro hd se
 

Multumesc de sfaturi.Acum nu mai merge nici youtube(videoclipuri de pe vevo).Sigur trebuie o noua versiune de sw.

Re: amiko micro hd se
 

Youtube move to HTML5.Do not work anymore on amiko hd receivers.
Youtube a trecut la HTML5.Nu mai merge pe niciun receptor amiko hd.

Re: amiko micro hd se
 

La mine merge.

Re: amiko micro hd se
 

i did try it bout every time i pres upgrade the program stop's and want upgrade when i pres dump flash it flashes bout want change anything if anyone have same receiver can you try flash this SW AMIKO_MicroHD_SE_Starlight_2.0.78_by Dekolte.rar and upgrade to latest one AMIKO_MicroHD_SE_2.0.91_mcas.zip

Re: amiko micro hd se
 

At the tab setting mode,tick "upgrade" not dump.[IMG]http://s8.postimg.org/r9051n6f5/Clipboard01.jpg[/IMG]

Re: amiko micro hd se
 

i did it many times bout this happen

Re: amiko micro hd se
 

Try to change compatibility mode of the loader or try to another computer with windows xp.On windows xp 100% works.

Re: amiko micro hd se
 

i will try bout i think i find it out why want upgrade by usb bicose of a date of SW in reviver
this is the date of SW i have it on my receiver
this is the date of the SW latest one on usb
this is the date of the SW every time i want to upgrade not only this SW bout any SW i try to upgrade it give me this date bout on usb is different modified date

Re: amiko micro hd se
 

Use for recovery official sw from amiko homepage.Date of last edit is inserted in maincode(AV) and is different than displayed date in windows.

Re: amiko micro hd se
 

i did try in xp to bout wont work http://www.world-satellite.net/attac...1&d=1428141556 there is nothing wrong with Sw and the Software or windows there is problem with my receiver

Re: amiko micro hd se
 

Same problem to me. Aceeasi problema e si la mine.

Re: amiko micro hd se
 

The preparation of receiver:
1st step unplug power cord
2nd step load firmware in upgrage tool(make alive my stb chip 3511)
3rd step select allsw+bootloader,tick upgrade not dump,click next and fast plug back power cord of your receiver.Good luck !

Re: amiko micro hd se
 

sorry my friend you and me we are trap we have flash with this AMIKO_MicroHD_SE_Starlight_2.0.78_by Dekolte.rar posted by edoroki
today i change my receiver because this SW is not good and i you flash this once you want be able to change it again to another SW it will be stuck on this SW

Re: amiko micro hd se
 

is there a plugin for amiko micro hd se to add this option to my receiver

Re: amiko micro hd se
 

The last comment was some time ago. But I faced the same problem now (STB freezed) and found the solution how to burn original firmware to Amiko micro HD SE via RS232. May be it will be of help to others.
I used the analog Video-Cable supplied with the Box (lengths of different 4-ring 3,5mm jack may not suit, as the 4th ring here is longer than others) and connected it via wires to the RS232 (see picture):

RS232: VideoCable RCA-Plug: VideoCableJack:
Pin 5 = GND any outer ring 4th ring
Pin 2 = R (eceive) yellow tip 3rd ring
Pin 5 = GND red tip 2nd ring
Pin 3 = T (ransmit) white tip 1st ring (tip

Software: (better use Windows XP):
1.) connect rs232 with Amiko micro HD SE physically (by cable) and plug power cable to receiver
2.) connect rs232 with Amiko micro HD SE by Software “Universal Upgrade SD-HD by Dekolte”
3.) download/ burn firmware from PC to Receiver with “Universal Loader SD-HD by Dekolte”
(have time! it downloads 2 times 0-100%, then it burnes)
Remarks: - if Step 2 or 3 doesn't work: unplug power cable and
fast plug it after clicking “next” at step 3.)
- select “all sw+bootloader” / tick “upgrade” not “dump”